Tag Archives: M33-Fio

Octoprint - M33-Fio - Raspberry Pi - select positions on the print bed

Running M3D Micro under Raspbian with Octoprint and MD3Fio plugin

The M3D Software is windows only, which causes a lot of wasted power by running a windows machine all time. After several and some successful attempts of running this software on a virtual machine inside my Linux, I figured out a much more easy way to print from a Raspberry Pi. It’s called Octoprint, but on an armhf basis requires a bit attention. In combination with the M33-Fio Plugin its serving perfectly as a printing server for the M3D-Micro I own.

Setting up your Raspberry Pi 3

To save me and you some time in future, I share the step by step code to set up an Raspberry Pi 3 with Octoprint from scratch. (even if there is an image down-loadable from Octroprint Website)

Start using Octoprint in browser

Start your browser at 127.0.0.1:5000 (or the ip of your rasbperry) and config Octoprint further:

Happy printing! With this combination of 3-5 Watt Raspberry Pi, and a maximum 20W M3D you can run the printer 24/7 without wasting more than a light bulb amount of power 🙂

Links: